Претраживање
Приказ резултата 11-20 од 30
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Failure investigation of the bucket wheel excavator crawler chain link
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The high mobility of open pit machines in heavy duty conditions provides fertile ground for the occurrence of various failures of the traveling mechanisms' vital parts such as chain links. The goal of the study presented ...
Explicit parametric method for optimal spur gear tooth profile definition
(Trans Tech Publications Ltd, 2013)
The gear tooth profile has an immense effect on the main operating parameters of gear pairs (load capacity, working life, efficiency, vibrations, etc). In current engineering research and practice, there is a strong need ...
A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill
(Hindawi Ltd, London, 2013)
This paper presents results of the research of micronization grinding of dry mica in a planetary ball mill. Investigation was conducted in order to improve the quality and to obtain clearly defined properties and characteristics ...
Failure of steam line causes determined by NDT testing in power and heating plants
(Gruppo Italiano Frattura, 2013)
This paper examines leakage and damages of steam and provides an overview of NDT testing in order to determine the cause of steam lines failure in power plants and heating plants. This approach may be applied to similar ...
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier Sci Ltd, Oxford, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons
(Maney Publishing, Leeds, 2013)
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, ...
Application of chromite in the production of refractory coatings
(Verlag Schmidt GmbH, 2013)
This work investigated the possibility of developing new chromite-based refractory coatings for hot metal casting applications. The coating composition and rheological properties were optimized by careful choice of binding ...
Prevention of electrofilter ash toxic leaching by embedding in composite materials
(Inženjersko društvo za koroziju, Beograd, 2013)
Disposal of the fly ash may pose a significant risk to the environment due to the leaching of hazardous pollutants. The only sustainable solution for the pollution-prevention is the reapplication of fly ash as one of the ...