Pretraživanje
Prikaz rezultata 21-30 od 38
Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation
(Wiley, Hoboken, 2015)
In this study, the feasibility of using fly ash to manufacture high-temperature mortars was investigated. The investigation was set to define preliminary characteristics of new types of mortars based on ordinary and/or ...
Stress concentration factors in re-evaluation of design solution
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, 2015)
The failures of various parts of mechanical systems in powe industry are the lessons that should be learned thoroughly. Every behaviour of structure close to design encelope must be ecxamined carefully in order to minimize ...
Effects of operation temperature on thermal expansion and main parameters of radial ball bearings
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2015)
The research of influence of operation temperature on the thermal expansion and main parameters of radial ball bearings is presented in this paper. The main bearing parameters are identified in accordance with the increasing ...
Factor space differentiation of brick clays according to mineral content: Prediction of final brick product quality
(Elsevier Science Bv, Amsterdam, 2015)
Chemical composition and XRD qualitative analysis were used to calculate mineral contents of 139 brick clay raw materials using LPNORM. The second order polynomial models (SOP) for all the samples, which express the relation ...
Network-level pavement life-cycle assessment tool
(CRC Press/Balkema, 2015)
In addition to their attempt to keep overall maintenance costs low while keeping their road networks in the appropriate condition, road agencies are facing even more demanding challenges as they incorporate effects on ...
Simulation of the kinematic hardening of AISI 316 steel by nonlinear finite element analysis
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, Serbia, 2015)
The coupled non-linear transient calculation is performed and explained in order to simulate the kinematic hardening behavior of AISI 316 steel and the Finite Element Method (FEM) is used for presented simulation. The ...
Performance Analysis of Damaged Buildings Applying Scenario of Related Non-Linear Analyses and Damage Coefficient / Analiza performansi oštećenih objekata, primenom scenarija povezanih nelinearnih analiza i koeficijenta oštećenja
(Gradjevinski materijali i konstrukcije, 2015)
The paper deals with a methodology developed and presented for analyzing the damage on structures exposed to accidental and seismic actions. The procedure is based on non-linear numerical analysis, taking into account the ...
The use of mine tailings as a partial aggregate replacement in SCC concrete / Upotreba jalovine iz rudnika kao parcijalne zamene za agregat u SCC betonu
(Zbornik radova Građevinskog fakulteta, 2015)
Jalovina koja se koristi u ovom istraživanju nema pucolanska svojstva, pa je ona upotrebljena kao zamena dela sitne frakcije agregata u malteru i betonu. U ovom radu je prikazana mogućnost primene jalovine u samougrađujućem ...
Damping Models for Flow Chart Based Structural Analysis
(Higher School Of Civil Engineering (VSU) 'L.Karavelov'-Sofia, Bugarska, 2015)
This paper presents the aspects of damping modelling in structural analysis through the systematization of damping types and flowcharts, depending on the type of analysis applied: linear and non-linear, static and dynamic. ...
Analysis of the steam line damages
(Mašinski Fakultet Banja Luka, Republika Srpska, 2015)
The methodological approach to the analysis of damage to determine the
cause of failure and to repair the damage has been shown using the example of leakage
and damage of a steam line for live-steam in thermal power ...