Претраживање
Приказ резултата 31-40 од 63
Tertiary plutonic rocks of central and western Serbia Vardar zone as dimension stone
(Berg Fac Technical Univ Kosice, Kosice, 2013)
Five Tertiary granitoid plutons of central and western Serbia Vardar zone are examined in order to establish their potentiality for use as dimension stone. Field studies aimed at establishing the geological factors - ...
Characterization of New Structure for Silicon Carbide X-Ray Detector by Method Monte Carlo
(Polish Acad Sciences Inst Physics, Warsaw, 2011)
This work presents a characterization of radiation absorption properties of silicon carbide (SiC) as semiconductor for the realization of detectors for X-rays. SiC detectors can potentially reach superior performance with ...
Process parameters influence on microstructural properties of hypereutectic al-18wt% Si alloys obtained by rheocasting process
(Editura Stiintifica Fmr, Bucharest, 2012)
Hypereutectic Al-18wt%Si alloy was obtained by conventional and rheocasting procedure at cooling rate 0.16 +/- 0.05 degrees Cs-1. Samples of rheocasted alloy were obtained at two stirring speeds 1000 and 1500 rpm. Tests ...
Opekarske gline iz Srbije - primena u proizvodnji grube keramike / Serbian heavy clays behavior: Application in rough ceramics
(Savez hemijskih inženjera, Beograd, 2013)
Gline i glineni minerali se, usled mnogih specifičnih osobina pre i nakon pečenja, decenijama koriste kao osnovni materijali za proizvodnju grube keramike. Proučavanje i utvrđivanje mineralnih faza koje su prisutne u ...
Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves
(Springer, New York, 2020)
This paper formulates a mathematical model using the extrapolation of load-settlement curves with a rational function for analyzing the capacity of piles obtained from the static load test (SLT). In preliminary analyses, ...
Chemometric Analysis of Alternations in Coal Ash Quality Induced by Application of Different Mechano-chemical Processing Parameters
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The coal fly ash mechano-chemical activation conducted via high energy ultra-centrifugal mill was optimized using mathematical and statistical tools. The aim of the investigation was to accent the merits of alternations ...
A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill
(Hindawi Ltd, London, 2013)
This paper presents results of the research of micronization grinding of dry mica in a planetary ball mill. Investigation was conducted in order to improve the quality and to obtain clearly defined properties and characteristics ...
Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja / Zircon-based coating for the applications in Lost Foam casting process
(Savez hemijskih inženjera, Beograd, 2012)
U ovom radu je istraživana mogućnost dobijanja novih vatrostalnih premaza na bazi cirkona koji bi imali primenu u livarstvu. Optimizacija sastava premaza kontrolisana reološkim svojstvima postignuta je primenom različitih ...
Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry
(Editura Stiintifica Fmr, Bucharest, 2012)
In this work, a possibility to develop new ceramic coats based corundum for casting applications has been examined. Optimization of coating composition with controlled rheological properties was attained by applying different ...
Specific features of stainless steel compression elements
(Croatian Soc Civil Engineers-Hsgi, Zagreb, 2015)
Stainless steel has a number of features that define different behaviour of structural elements made of this material, as related to equivalent carbon steel elements. These properties, especially prominent in case of ...