Претраживање
Приказ резултата 31-40 од 136
Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of gamma to alpha phase transformation mechanism
(Elsevier Sci Ltd, Oxford, 2014)
In this study, the feasibility of alumina phase transition enhancement by mechanical activation was conducted. It was showed that the milling environment plays an important role on the physical, chemical and thermal behavior ...
Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins
(Elsevier Sci Ltd, Oxford, 2018)
The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of ...
Comprehensive approach to the influence of frequently used secondary raw materials on clay bricks quality using mathematical modeling (a systematic review)
(Elsevier Sci Ltd, Oxford, 2018)
The main idea of this research was to evaluate rice and sunflower hulls, sawdust and their ashes, as additives in clay brick production using mathematical analysis. All available papers, containing the parameters of interest, ...
Drying kinetic simulation of clay tiles made from the raw material having less clay fraction
(Trans Tech Publications Ltd, 2014)
In order to describe the internal moisture rate and to take all different mechanisms of moisture movement into account, it is suitable to use effective diffusivity as a measure of moisture rate, irrespectively of the ...
Influence of nanoparticles on the strength of ultra-high performance concrete
(Elsevier, 2018)
Ultra-high performance concrete (UHPC) is a modern composite material with extremely good mechanical characteristics. The application of nanoparticles in concrete is one of the possibilities for improving its properties. ...
Influence of FSW parameters on formation quality and mechanical properties of Al 2024-T351 butt welded joints
(Elsevier, Amsterdam, 2013)
The influence of R/v ratio on joint quality in 2024-T351 aluminum alloy was studied. Specimens were subjected to friction stir welding with the rotation rates of 750, 950 and 1180 r/min and welding speed between 73 and 190 ...
Analysis of current state and integrity evaluation for the supply tank of generation unit 6 of thermal power plant Nikola Tesla ”A”, Obrenovac
(Trans Tech Publications Ltd, 2014)
Stable supply tank, with volume V = 250 m3 and operating pressure p = 1,5 MPa, of generation unit 6 at thermal power plant 'Nikola Tesla A' in Obrenovac, is designed for water-steam working fluid. It was made of steel Č ...
Investigation of the Repair Welding Technology Using Ni Base Electrode
(Trans Tech Publications Ltd, Durnten-Zurich, 2013)
Metal materials are subjected to innumerable time-dependent degradation mechanisms when operate in power, petrochemical and refinery plant. These materials are subjected to multiaxial stresses, creep, fatigue, corrosion ...
Methodology for reparation of damaged sleeves and welded shield sections of guide vanes at hydropower plant DJERDAP 1
(Trans Tech Publications Ltd, 2014)
Vertical Kaplan turbines, manufactured in Russia and with nominal power of 200 MW, have been installed in 6 hydroelectric generating units at ’Djerdap 1’. During the refurbishment of hydropower plant experimental non-destructive ...
Analytical modeling of activation procedure applied in alpha-alumina thermo-mechanical synthesis
(Elsevier Sci Ltd, Oxford, 2015)
The impact of the mechanical processing parameters on the alumina grain-size distribution affiliated characteristics and on the gamma to alpha phase transformation rate was investigated. The moderation in the alumina samples ...