Претраживање
Приказ резултата 41-50 од 324
The influence of grooves on the behavior of steel tube shock absorbers
(Proceedings of the 7h International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia, 2019)
Major function of railway vehicles absorbers is to absorb energy through controlled deformation during frontal rail vehicle collisions. The results presented and discussed in this paper is a part of the research of one ...
Analysis of contact fatigue coupled with geometry and material nonlinearities by Theory of critical distances
(2nd Conference on Nonlinearity, Belgrade, 2022)
The contact fatigue is a localized phenomenon that occurs in highly
stressed local zone of the material under the loaded contact region and as such is
highly nonlinear problem. This phenomenon exists in almost all real ...
Stress concentration factors in re-evaluation of design solution
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, 2015)
The failures of various parts of mechanical systems in powe industry are the lessons that should be learned thoroughly. Every behaviour of structure close to design encelope must be ecxamined carefully in order to minimize ...
Experimental research of mechanical characteristics of railway vehicles safety coupling components
(International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2021, Zlatibor, Serbia, 2021)
The coupling system provides a mechanical connection between European railway vehicles. Screw couplings are designed as a safety device in railway vehicles with coupling links and screw as two main components intended to ...
Gas cylinder rupture induced by local corrosion damage
(Society for Structural Integrity and Life – Prof. Dr Stojan Sedmak (DIVK), 2018)
Commercial gas cylinders are common type of pressure vessels in many health care and technical facilities. Unexpected
failures of gas cylinders occur despite of fact that the design, manufacture route, quality control, ...
Simulation of the kinematic hardening of AISI 316 steel by nonlinear finite element analysis
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, Serbia, 2015)
The coupled non-linear transient calculation is performed and explained in order to simulate the kinematic hardening behavior of AISI 316 steel and the Finite Element Method (FEM) is used for presented simulation. The ...
Neural network model for the condition assessment of hydro turbines
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, Serbia, 2022)
During regular operation, hydro turbine elements have complex operating conditions. In order to prevent major failures, among other common preventive measures, it is necessary to make a useful model of hydro turbine. ...
Theory of critical distances in analysis of the influence of tooth profile on gears bending capacity
(5th International Conference on Power Transmission BAPT2016, 2016)
The fatigue cracks and failures in tooth roots are still one of the most common problems in gear pairs operation.
Therefore, the application of new methods and up-to-date calculation procedures is welcome. This paper ...
Analysis of Hertz contact stresses for metallic material with carbides
(8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia, 2021)
Hertz contact and the resulting stress-strain state arising from the contact between two elastic solids have practical application in hardness testing, wear and impact damage of engineering ceramics, the design of dental ...
Modal analysis of the hydro turbine shaft with cracks
(Abstracts of 14th International conference Dynamical Systems - Theory and Applications, 2017)
The design process for the elements which are the parts of the structures and equipment in power industry includes both of stress and strain state calculations, as well as an analysis of natural mode shapes and frequencies. ...