Претраживање
Приказ резултата 71-80 од 86
Centar za metale i energetiku Instituta za ispitivanje materijala IMS (istorijat - sadašnjost - budućnost)
(Integritet i vek konstrukcija, specijalno izdanje, 2023)
Centar za metale i energetiku, u okviru Instituta IMS, je od početka osnivanja i kroz celu njegovu istoriju kroz svoje multidisciplinarne delatnosti neizostavni deo poslovanja. Sam centar za metale predstavlja lidera u ...
Effective removal of the heavy metal ion Cd2+ from the structure of cementitious materials with mineral additives
(Structural Integrity and Life, Special Issue, 2023)
Natural zeolite and bentonite were used as mineral addi-tions to create cement-based building materials that are safe for the environment. This research focuses on the adsorptive qualities of these two clay raw materials, ...
Novel and rapid drying characterization test suitable for The brick and tile industry
(International Journal of Modern Manufacturing Technologies, 2022)
The industrial raw material compositions in brick
or tile production are normally adapting from time to time
with novel clays. The proper raw material change must be
based on the reliable raw material characterization ...
Influence of coal ashes on fired clay brick quality: Random forest regression and artifcial neural networks modeling
(Elsevier Ltd, 2023)
Finding a solution to the problem of the large buildup of coal ashes is a vital necessity. Although the use of coal
ashes in fired clay bricks has been thoroughly investigated, there is insuffcient information on their ...
Biomimetics Design of Tooth Root Zone at Cylindrical Gears Profile
(Biomimetics, 2023)
During the last few decades, the requirements for modern machine elements in terms of size
reduction, increasing the energy efficiency, and a higher load capacity of standard and non-standard
gears have been very prevalent ...
An augmented approach for the determination of the particle size effect on energy dispersive X-ray fluorescence analysis outcomes for alumina-based refractory materials
(Spectrochimica Acta Part B: Atomic Spectroscopy, 2023)
The chemical compositions of refractory materials, such as high-alumina concrete, bricks, and putty, were analyzed using an energy-dispersive X-ray spectrometer (EDXRF). An improved methodology for investigating the effect ...
Recycling and Reuse of Building Materials in a Historical Landscape—Viminacium Natural Brick (Serbia)
(MDPI, 2023)
During the MoDeCo2000 scientific and research project on mortars used in the territory of the Roman Danube Limes in Serbia, the biggest challenge was the quest for the provenance of raw materials. The area where Viminacium, ...
Processing of Data Obtained by the Testing of Steel under Low Cyclic Fatigue (Part I)
(University of Zagreb Faculty of Mechanical Engineering and Naval Architecture, 2022)
The design of mechanical components exposed to fatigue load, at a low number of cycles, requires knowledge of the behaviour of the material under the impact of variable load in conditions of controlled strain when cyclic ...
Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles
(Comptes rendus de l’Académie bulgare des Sciences, 2022)
The paper presents the static load tests (SLT) and dynamic load tests (DLT) of the piles and numerical analyses of piles in interaction with the soil of wind turbines. Pile tests were conducted using the equipment with ...
The recycling of demolition roof tile waste as a resource in the manufacturing of fired bricks: A scale-up to the industry
(Elsevier Ltd, 2024)
This study illustrates the utilization of roof tile waste as a resource in the manufacturing of fired bricks. Although commonly referred to as demolition waste, it is technically classifed as construction and demolition ...