Претраживање
Приказ резултата 11-20 од 29
Correlation among sintering process, porosity, and creep deformation of refractory concrete
(Springer, New York, 2009)
The aim of this paper is to establish the correlation among sintering process, porosity, and important thermo-mechanical property of refractory concrete, i.e., creep. Creep deformation was investigated according to the ...
Possibilities of producing solid bricks from mixtures of plastic brick clay and fly ash
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
The paper briefly reviews results of laboratory testing performed in order to establish the possibility of adopting the process of production of solid bricks from plastic clay and fly ash. The experimental results substantiated ...
Geometry, mechanical properties and mounting of perforated plates for ballistic application
(Elsevier Sci Ltd, Oxford, 2010)
In this paper, the ballistic resistance of perforated plates made of different types of steel, mounting and geometry was investigated. Different types of steel in various heat treatment conditions were tested. Target ...
Wire fence as applique armour
(Elsevier Sci Ltd, Oxford, 2010)
In this paper, the behaviour of wire fence was investigated for potential as applique armour. The wire fence used was made from commercial high-strength patented wire and the supporting frames were made of mild steel ...
Dehydration investigations of a refractory concrete using DTA method
(Springer, Dordrecht, 2012)
The base mix refractory concrete is corundum-based, containing corundum as refractory aggregate and CAC as hydraulic binder, with a spinel as an additive. The authors investigated the dehydration reactions which occur from ...
Comparative analysis of process parameters of talc mechanical activation in centrifugal and attrition mill
(Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw, 2014)
The efficiency of talc mechanical activation by means of two different mechano-activators centrifugal and attrition mill is investigated in this study and the comparative analysis of the characteristics of obtained talc ...
Application of Results of Nondestructive Testing Methods in the Investigation of Microstructure of Refractory Concretes
(ASCE - American Society of Civil Engineers, 2010)
The aim of this investigation is to establish the correlation between concrete porosity, compressive mechanical strength, and microstructure using the results of nondestructive testing methods, i.e., ultrasonic pulse ...
Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons
(Maney Publishing, Leeds, 2013)
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, ...
Development of New Cordierite-Based Refractory Coatings for Casting Applications
(Wiley, Hoboken, 2014)
In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design ...
Evalution of concretes with standard and recycled raw materials for high temperature application
(Revista Romana de Materiale/ Romanian Journal of Materials, 2012)
Concrete undergoing thermal treatment before and during life-service can be applied as building material for thermal insulation in high-temperature plants. When such concretes are designed with secondary raw materials they ...