Pretraživanje
Prikaz rezultata 21-30 od 51
Analysis of current state and integrity evaluation for the supply tank of generation unit 6 of thermal power plant Nikola Tesla ”A”, Obrenovac
(Trans Tech Publications Ltd, 2014)
Stable supply tank, with volume V = 250 m3 and operating pressure p = 1,5 MPa, of generation unit 6 at thermal power plant 'Nikola Tesla A' in Obrenovac, is designed for water-steam working fluid. It was made of steel Č ...
Methodology for reparation of damaged sleeves and welded shield sections of guide vanes at hydropower plant DJERDAP 1
(Trans Tech Publications Ltd, 2014)
Vertical Kaplan turbines, manufactured in Russia and with nominal power of 200 MW, have been installed in 6 hydroelectric generating units at ’Djerdap 1’. During the refurbishment of hydropower plant experimental non-destructive ...
Mechanical Activation as Sintering Pre-treatment of Talc for Steatite Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
The effect of vibratory mill induced mechanical activation on the change of the particle size, crystallinity and the phase transformations of the minerals present in the activated material, was studied with the purpose of ...
Development of New Cordierite-Based Refractory Coatings for Casting Applications
(Wiley, Hoboken, 2014)
In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design ...
Guidelines for technical regulations and standardization of turbine and hydromechanical equipment during production and exploitation
(Institut IMK "14. oktobar", Kruševac, 2014)
Turbine and hydromechanical equipment at hydro power plant 'Đerdap 1' is subjected to service conditions which lead to degradation of materials and structures. Taking into account the frequency of failure occurrence and ...
Determination of the moisture diffusivity coefficient and mathematical modeling of drying
(Elsevier Science Sa, Lausanne, 2014)
Drying plays an important role in the production of clay tiles. In the present article, drying process is analyzed taking experimental data for several masonry clays obtained from different clay tile manufacturers and ...
Developing Cost Estimation Models for Road Rehabilitation and Reconstruction: Case Study of Projects in Europe and Central Asia
(ASCE - American Society of Civil Engineers, 2014)
This paper presents the development of prediction models for the unit costs of road works that could be applied to strategic planning of road works at the network level. A specialized data set was used, which was generated ...
Drying simulation of shrinkable clay tiles using variable diffusivity model
(Trans Tech Publications Ltd, Stafa-Zurich, 2014)
This paper represents the upgrade of our previous study in which we have presented a model for simulation of the drying kinetic and estimation of the effective moisture diffusivity of clay tiles using a constant diffusivity ...
Thermal and mineralogical characterization of loess heavy clays for potential use in brick industry
(Elsevier, Amsterdam, 2014)
This paper describes a study of 11 selected samples of loess soil from Serbia, by using differential scanning calorimetry, simultaneously with thermogravimetry and its differential calculation, known as simultaneous thermal ...
Analysis of trace elements in surface sediments, mussels, seagrass and seawater along the southeastern Adriatic coast - a chemometric approach
(Walter De Gruyter Gmbh, Berlin, 2014)
Surface sediments, mussels, seagrass, surface and bottom seawater samples were collected from the costal area of the southeastern Adriatic Sea and analyzed in order to determine the concentration and origin of the following ...