Pretraživanje
Prikaz rezultata 41-50 od 131
Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'
(Institut za ispitivanje materijala, Beograd, 2020)
Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken ...
Determination of ventilation heat losses through building envelope – a case study
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2022)
In this paper the experimental procedure for the determination of ventilation heat losses across building envelopes has been shown. The alternative name for this method is Blower Door Test or Fan Pressurization method. ...
Estimation of the drying behaviour for different clay raw materials - drying sensitivity techniques review Epitoanyang 2022
(Epitőanyag – Journal of Silicate Based and Composite Materials, 2022)
In order to rate the drying behavior of different clay raw materials it is necessary to establish
the criteria for comparison. Mineralogical composition, clay minerals content, particle size
distribution, packing, porosity, ...
Testing of building materials - reaction to fire
(Proceedings of the 17th Conference with International participation risk and safety engineering, Kopaonik, 2022)
To reduce occurrence of fires in buildings as efficiently as possible, it is necessary to take into account active and passive fire protection measures during construction of building. This paper will show more about passive ...
Raw kaolinitic–illitic clays as high‑mechanical‑performance hydraulically pressed refractories
(Journal of Thermal Analysis and Calorimetry, 2022)
The usage possibility of 19 composites of raw refractory clays from Serbia containing approximately 53.29% of SiO2 and 26.73% of Al2O3 is presented. The sum of fluxing oxides was 57.74%, while these materials contained 32% ...
Analysis of the influence of pre-treatment with liquid hot water (LHW) on the chemical composition of wooden chips / Analiza uticaja predtretmana vrelom vodom (LHW) na hemijski sastav drvnog iverja
(Advanced Technologies 2022, vol. 11, 2, 40-47, 2022)
The goal of this paper is to analyze the chemical composition of untreated and
treated wooden chips from the native narrow-leaved ash (Fraxinus angustifolia
Vahl. ssp. Pannonica Soó & Simon). In order to determine the ...
Evaluation of Inverted-Pendulum-with-Rigid-Legs Walking Locomotion Models for Civil Engineering Applications
(MDPI, 2022)
Bipedal models for walkers, originally developed in the research field of biomechanics,
have been identified as potential candidates for modelling pedestrians in structural engineering
applications. These models provide ...
Imobilizacija teških metalnih jona Zn2+, Ni2+, Pb2+ i Cu2+ u strukturi materijala na bazi cementa / Immobilization of heavy metal ions Zn2+, Ni2+, Pb2+ and Cu2+ in the structure of cement-based materials
(Inženjersko društvo za koroziju, Beograd, 2020)
Prirodni zeolit i bentonit korišćeni su kao mineralni dodaci u mešavinskom dizajnu ekološki sigurnih građevinskih materijala na bazi cementa. Ispitane su adsorptivne sposobnosti ove dve glinene sirovine, tj. njihov afinitet ...
Experimental and numerical analysis of a walls made from aerated concrete blocks exposed to fire
(Proceedings of the 19th International Symposium MASE, Ohrid, 2022, 2022)
The unsteady heat conduction in composite planar structure, with arbitrary number of layers, using analytical approach based on Greeds Functions (GF) is analyzed. The analytical solution for spatial and temporal temperature ...
Nonlinear Dynamics as a Tool in Selection of Working Conditions for Radial Ball Bearing
(Springer, 2020)
This paper contains elements of a comprehensive research devoted to the dynamic behavior of radial ball bearings in real working conditions. The general motivation for this topic comes from the requirements for high ...